Monday, June 8, 2020

EUGENE FREIGHT HOUSE

During this period of "encouraged" shut-in, I have continued to fill blank spaces in the Eugene and Springfield areas of my railroad.  The current gap-filling is with the Eugene Freight House.  The freight house was located near the Eugene passenger depot and train order station.  Back in the days of extensive railroad less-than-carload and express service, the Eugene freight house saw daily service.  Indeed, a regular baggage-express run had a car come down from Portland to Eugene for set-out at the freight house and then return to Portland in a subsequent First Class train.  By the 1950's, this service was provided by the Klamath, Trains 19 and 20, the mail and express train on the Shasta-Cascade Route.  

I struggled with a design for this freight house for many years.  A Walt Paschelke photo published in the Austin and Dill Southern Pacific in Oregon Pictorial showed the office end of the freight house and a narrow-angle view along the mainline track side.  The subject of that photo was a steam-powered relief outfit train on the main, but it also revealed important details of the freight house.  My search for additional photos or information kept drawing blanks.

Motivated by a presentation that was to have been made at the Eugene convention of the Pacific Northwest Region of the National Model Railroad Association, I decided to simply plow ahead with the modest information I had on hand.  This included the published photo, standard freight house planforms published in Henry Bender's Southern Pacific Lines Standard-Design Depots book, and various plans for SP Common Standard depot structures.  This last point provided a common architectural style with which to interpret both the photo and the freight house planforms.  

Using the Walt Paschelke photo of the office end and sighting along the trackside platform and a boxcar spotted at the freight house, I could estimate dimensions.  I chose a building 25 feet wide--a common SP standard for wood structures such as this freight house and combination depots.  I estimated the eave height at 18 feet.   Common Standard depot plans gave me a roof pitch at a 30-degree angle.  Those plans and the freight house planforms in Bender's book suggested freight doors spaced at 37 feet, which proved convenient for the length of building materials I was using.  I chose to model four freight bays and an overall building length of 160 feet which included a 25-feet long office.

Basic construction was relatively straight-forward for me using styrene.  I obtained a 24-inch long sheet of V-groove siding from Evergreen Scale Models that I cut out the sides from.  The ends were cut out from a similar sheet of more readily-available 12-inch long sheet.  Interior partitions were cut from 0.040-inch thick styrene sheet.  These helped maintain wall and roof geometry.  I used long sheets of 0.040-inch thick styrene for the sub-roof panels, but had to splice them for my desired length. 


Basic freight house construction.  The long interior walls are braced at the top and dock level and ridge-line bracing will support the roof.  The loading platforms were estimated at five-feet depth.  The sub-roof panels have been spliced to get the desired length.  The office has interior walls and the floor section, painted brown, is off to the right.

As usual with what appears to be a "simple" project, the "devil is in the details."  Easiest was the use of Tichy windows and the personnel door for the office.  I selected Tichy parts that were similar to SP practice--a tact taken with a number of commercial structure kits.  Looking at freight section ends of various depots, I decided I could use a long window high in the gable of the freight end of the building.  I pieced together four windows cut from a Tichy horizontal sliding window.  The office chimney was a Tichy part.  I added interior walls to the office section and even a floor with the office counter on it (the brown square to the right of the depot in the photo above).  I braced the walls and the ridge line of the building with 1/8-inch square styrene.

I chose asphalt shingles for this structure--a common choice as seen in photos of SP company structures in Oregon.  I used JTT Architectural Model Parts #97440, marketed by MRC.  One package with two 7.5 x 12-inch sheets was sufficient, although I did need to splice these for my full roof length.  Although the embossed shingle sheets were styrene and the sub-roof panels also were styrene, I chose to laminate these parts together using contact cement.  This gave me the working time I needed to position the shingle sheets on the sub-roofs.  

As seen in the Walt Paschelke photo, the roof overhang was cut down on the mainline side of the building, but left intact on the street side.  I used a five-feet roof overhang on the street side and for the ends.  I made simple eaves brackets from 0.040 x 0.060-inch styrene strip.  These were painted and added after the main building paint was applied, as they appear to be painted SP's trim brown.

I painted the structure using TruColor paint.  This was my first use of TruColor, although it handles very similarly to AccuPaint which I used several decades ago.  Water-soluble Floquil Polly-S acrylic paint is no longer available and my personal stash is growing thin.  I will reserve use of that stash for other areas of the layout that have structures painted with it already.  My Eugene and Springfield area is self-contained, so I will use TruColor for company structures in this area.  TCP-153 SP Colonial Yellow lives up to its reputation an excellent rendition of that color.  My judgement is reserved on TCP-164 SP Trim Brown, as I had difficulty with that color.  I blew right through the single bottle of it I had before I had even half of the parts I needed painted that color.  I wanted to keep this project moving along, so I switched to a suitable Polly-S color I had.  Taking a cue from Tony Thompson's "Modeling the SP" blog, I faded the TCP-154 Moss Green with white at about 4:1 when I painted the roof.  This matched well to my previous use of Polly-S Depot Olive.  One consequence of using TruColor paint is its gloss finish.  I needed to apply a flat finish to the mostly complete structure before installing the windows with their clear glazing.

I have found with SP structures that it is useful to paint the trim separately before applying it to the main structure.  Fortunately, there is very little trim on this freight house, especially for my desired 1950's appearance.  One item with considerable contrasting trim was the freight door design.  I painted the basic door sections SP Colonial Yellow.  I subsequently built up the trim which was painted brown, attaching it with canopy cement.  In concert with others (including Tony Thompson, from whom I got the inspiration), I find canopy cement a very useful adhesive.  It works like white glue, including its working time.  That was very useful when aligning trim boards on the freight doors.  I also applied the door frame and other trim to the main structure in the same way.


Trim strips being built up on the freight doors.

A final detail for this freight house was the roof-mounted "Southern Pacific Freight Station" sign.  I could just make out the end edge of such a sign in the Walt Paschelke photo.  Looking through Southern Pacific Lines, Pacific Lines Stations Volume 1, published by the Southern Pacific Historical and Technical Society, I found Salem, Oregon, had a similar freight house with roof-mounted sign.  This made sense, as both cities were sizeable and had competition from the Oregon Electric (Spokane Portland and Seattle).  Indeed, the Oregon Electric Eugene passenger depot was only two blocks away from the Southern Pacific depot complex, so a roof-mounted sign identifying the SP made sense.  

I made a sign on cardstock using a standard font in PowerPoint.  I might have been able to find a more exact match to the type-face used on these signs, but what I have is close enough.  It appeared that the sign was white letters on a black background, framed with trim brown.  I laminated a pair of the signs printed on cardstock and then added styrene trim painted brown.  using the mounting system seen at Salem, the sign is supported on round posts (styrene rod on my model) above the roof ridge.  Diagonal braces formed with brass wire on my model lead outward on the roof.  Mounting and attaching this sign proved a bit challenging, but I eventually got it done. 


Completed Eugene freight house with roof-top sign.


The Eugene freight house, ready for business.  As with most of my Eugene scene, the freight house was built as a mirror-image of the prototype building.

I still need to weather my freight house and set it into the scene--much like the rest of my structures.  Still, I am enjoying having a structure with distinct SP common-standard architecture and standard SP colors occupying an important piece of real estate on my railroad.  In this case, I will even make a rare exception for me (an Oregon State graduate!) and accept the similarity of the SP colors to those of the state-rival institution in Eugene.  <wink>

Sunday, May 31, 2020

FRED FRAILEY'S LAST TRAIN TO TEXAS

Long-time "Trains Magazine" columnist, journalist and railroad author Fred Frailey retired this year from his regular column in Trains.  His column was the first item I would seek out to read in each new issue of "Trains."  Easing the pain of his loss to rail enthusiasts is his recently published Last Train to Texas.  Fred collects in this book a number of his notable columns for "Trains" and a couple of articles.



I have long been a fan of Fred Frailey's writings and observations on railroading.  He brings a classic journalist's eye for a story together with an enthusiasm for railroading-the industry and the people-that I found particularly perceptive.  He has a keen eye for detail and well-developed "BS Filter" that I find hits closer to the mark of truth than most writers. Over the years, he cultivated ties to men who became leaders of the industry that gave him access to decisions that form the modern North American rail net.

The forty-six chapters are arranged in three thematic groupings:  Running the Railroads, Travels Around Trains, and Kicking the Trains Down the Tracks.  The first grouping on "Running the Trains" profiles a number of rail industry leaders, often pointing out positive attributes of men otherwise reviled by rail workers or railfans.  The second grouping on "Travels Around Trains" documents a number of Fred's own travels, either by rail or car-to chase and photograph trains.  

The final section titled "Kicking the Trains Down the Tracks" is a collection of his perceptive journalism reflecting upon events and management choices that continue to shape railroading.  The final chapter of this section and the book covers the traffic meltdown in Texas that took place soon after the Union Pacific acquired the Southern Pacific in 1996.  This longer article contrasts Fred's observations against official UP pronouncements during the traffic meltdown that nearly brought all UP traffic to a standstill.  This chapter represents some of the best of Fred's writing.

I have long enjoyed Fred's writing in "Trains," first as articles and then as a regular columnist.  His 1991 "Blue Streak Merchandise" book published by Kalmbach sits proudly-and well-read-on my bookshelf.  It will be joined now by Fred's latest work which gave me a great collection of his past work for bedtime reading.  Last Train to Texas is a wonderful send-off for Fred as he enters a well-deserved retirement.  His writing will be missed in the current tense, but some of the best of his body of work is now bound between hard covers in a convenient collection.

Published by Indiana University Press and available through booksellers, Last Train to Texas belongs in rail enthusiasts' libraries--certainly for those who want to understand how we got to where we are today in railroading.

Tuesday, May 19, 2020

INDUSTRIAL DEVELOPMENT - 4 - ROSBORO LUMBER - 3

Continuing my development of Rosboro Lumber in Springfield, I turned to two structure complexes geographically west of the main loading sheds.  Along the tracks, the first of these features multiple roof peaks.  Looking at the satellite view, I see the distinct shape of a mill building surrounded by the multi-peak shed along the tracks and other sheds around it.  Further west is a pair of bow-roof structures. 


Rosboro Lumber looking geographic west from the large loading sheds.  A multi-peaked roof warehouse or loading shed is in the center while a pair of bow-roofed structures loom in the background, further along the track.

Both of these structure complexes on the western side of the Rosboro Lumber facility lend themselves to simple modeling with foam-core construction overlaid by printed cardstock texture.  My previous post on the large bow-roof loading shed describes my construction technique.  That post also contains a link to the first post of this series. https://espeecascades.blogspot.com/2020/04/industrial-development-4-rosboro-lumber_30.html  

The multi-peaked roof structure needed to fit within the start of the curve that forms the turn-back loop at the end of my Springfield peninsula.  Although the curvature was not great where I needed to place this structure, it still presented a challenge.  I needed to break the front wall along the track mid-way to take up a slightly different face angle.  That posed the challenge of what to do with the roof peaks and valleys.  After experimenting with a couple of layouts, I selected keeping the roof peaks and valleys parallel and adjusting for the two different face angles by trimming the roof ends appropriately.


Laying out the multi-peak roof structure and mill building.  At this point, I have the trackside multi-peak structure laid out and the main mill building behind it.  A side shed is plotted on the geographic east end facing the main loading sheds.  The satellite view was a big help in laying out this complex.


Mocking up and test fitting the main structure walls for the multi-peak roof structure and main mill building.


Laminating the siding to the multi-peak roof building.  End vents were cut into the siding near two of the roof peaks, per my prototype photos. 

As I built up this warehouse and mill complex, I recognized I needed to add more structures around the mill.  Lacking photo coverage on that side of the structure, I had to "guestimate" what they might look like, inspired by the satellite view.


Additional structures surround the central mill building.  The pair of bow-roof structures loom in the background.

The pair of bow-roofed sheds were built the same as my first such shed, although their interiors could be much simpler.  I had very little photo coverage of these sheds, so I took a simple approach to build them fully enclosed.  I did leave the main mill-side doors open on the ends, though.  Although my prototype photos indicate an additional bowing of the roof toward one end, as well as side to side, I chose to keep my models simple with the single main arch of the roof.


Rosboro Lumber looking geographic east.  The bow-roof sheds are in the foreground, followed by the multi-peaked structure and mill building and then the large loading sheds around the curve on my layout.


Multi-peaked roof structure along the main loading spur for Rosboro Lumber Co.

I have lots of detail to add to these structures, but for now the space is filling in nicely.  This end of the Springfield area is no longer bare plywood!

Tuesday, May 12, 2020

OAKRIDGE TURN

With formal operating sessions cancelled this Spring I determined I could get some model railroad operating done on my layout by documenting regular operating jobs on my railroad.  First up is a favorite job--the Oakridge Turn.  This job originates at Eugene and runs to Oakridge where it performs much of its work.  After organizing the train for efficient switching, the Turn performs local switching in Oakridge and services the Pope and Talbot lumber mill on the geographic east end of town.  Historically the crew lays off for eight hours rest.  On my railroad this often is simulated by waiting until the next operating session to resume work.  Returning to duty at Oakridge, the Turn job completes switching in Oakridge by serving Standard Oil, which must be switched using mainline authority on the railroad east end of town.  With that authority still in effect, the train begins its return to Eugene via Westfir where it switches Western Lumber with its now-trailing point spurs.  Follow me in pictures as I work the Oakridge Turn.


I have just gone on duty at Eugene.  My train is on the Eugene City Yard Track-2, a common location for made-up local trains.  I am checking the car cards and waybills, acquainting myself with the make-up of the train and already thinking about how I will reorganize it in Oakridge.


With mainline authority to Oakridge, I made a fast run, just squeezing into town against a priority RR-eastbound with auto racks over on the mainline.


The Oakridge Turn rolls into yard track 4.  Oakridge Tracks 3 and 4 are habitually used by the Turn, leaving yard tracks 1 and 2 for use by railroad-west-bounds getting their helpers cut-in.  We see that priority RR-East on the main with its auto racks up front.  A RR-West is on Track 2 and its helper set is on Track 1, waiting to cut ito the middle of that RR-West train..


Our first order of business is to reorganize our train for efficient switching.  I began by building the return portion of the train on Track 3, beginning with a tank car billed to Standard Oil.  Next will be cars in correct order for the two spur tracks at Western Lumber in Westfir.  


I use the Pope and Talbot spurs as a switch lead.  I moved most of the loads on P&T-1 over to P&T-2 to get the most space for my long switch moves between Oakridge Tracks 3 and 4.  


Continuing with my train reorganization, I have created a block of cars for the engine facility (oil and sand) and rock for the maintenance of way troops.  At this point, most of the Pope and Talbot cars are on Track 4.  I am grouping the cars destined for the house track, also.


Gathering the cars for the House Track in correct order, I got Dispatcher authority for use of the mainline block RR-West of town.  I use it to access the House Track.



I pulled the outbound cars from the House Track, setting them over onto Track 3.  Note the 65 feet long mill gondola I pulled from Lane Electric on the end of Track 3.  A fresh 65-ft. gondola and a box car have been spotted on the House Track for Lane Electric as well as a boxcar delivered to the depot.


Returning to the Oakridge Yard, I release my mainline authority back to the Dispatcher.  I then complete setting out the new cars at Pope and Talbot with the wood chip gondolas in back on P&T-2 and flats and boxcars for lumber on P&T-1.  Note the flat cars are on the RR-East end of the spur, closest to Oakridge Yard, per standard instructions conveyed by the freight agent from Pope and Talbot.



Using the cross-overs between Tracks 3 and 4, just beyond my locomotives and cars, I have organized the cars for company service in Oakridge.  The two covered hoppers with sand are on the RR-East end of my locomotives, while the rock hoppers and company oil tank are trailing my power.


Working the switching puzzle at the RR-East end of town, I have successfully delivered the company oil tank and rock hoppers.  As an alternative, I might have used the wye to work around to this end of town.  The engine house foreman was friendly today, so I used the engine terminal run-through to get to this end of town.


Completing the switching puzzle at the RR-East end of town, I have delivered the pair of sand covered hoppers, pulled the empty covered hopper and an empty company oil car.  I am collecting the empty company service cars prior to placing them in my train.


Completing the work in Oakridge, I am placing my locomotives on the RR-East end for the run back to Eugene.  With the train made up for its RR-East return, the crew goes off-duty for their eight-hour rest.  Upon return to duty (usually in the next operating session) the Oakridge Turn starts RR-East with mainline authority.  The first item of business is switching the Standard Oil spur which is the left-most track seen here.  Mainline authority is needed for this set of moves, so this activity is usually lumped with the mainline authority to Westfir.


Having switched Standard Oil (note the two tank cars) I am now serving Western Lumber at Westfir.  I am pulling the loaded plywood cars and wood chip gondolas from Westfir Track 1 so I can place them ahead of the tank cars for proper train make-up involving tank cars.  The empty tank cars led out of Oakridge for the very short distance to Westfir.  This is deemed safer than the more complicated set of moves needed to place them deeper into the train immediately.  Tunnel 22 is directly at the RR-East end of Oakridge and makes switching at that end of town difficult.


Fresh empty cars are switched back into Westfir Track 1 for wood chip and plywood loading.  Next to be switched will be lumber on Track 2.  Once again, the flat cars will be left on the RR-East end of the lumber loading spur.


With the work completed at Westfir, the Oakridge Turn rolls RR-East, here crossing the Willamette River on its way back into Eugene.

Both the out-bound and returning Oakridge Turn jobs have been highly sought assignments during my crew selection process at the start of an operating session.  Almost all operating sessions have at least one half of the Turn.  Some sessions see both pieces.  The job has challenges.  The out-bound Turn must organize the train for efficient switching. It needs mainline authority to switch the House Track and must otherwise stay out of the way of mainline operations. The returning RR-East-bound Oakridge Turn must switch very efficiently, as it blocks the mainline all the time it is working.  The key to both sets of tasks is the initial train reorganization that needs to be done upon arrival in Oakridge from Eugene.

Thursday, April 30, 2020

INDUSTRIAL DEVELOPMENT - 4 - ROSBORO LUMBER - 2

As I work on the initial structures for what will be my large Rosboro Lumber Co. mill complex in Springfield, I am becoming ever more aware of just how large this facility is in full size and even in model space.  As noted in my first installment on Rosboro Lumber (https://espeecascades.blogspot.com/2020/04/industrial-development-4-rosboro-lumber.html) the prototype facility occupies considerable space along the tracks at Springfield.  That also is true of my model, albeit selectively compressed.  

My first structures are what I identify as the primary lumber loading sheds, composed of a large bow-roof structure, a narrow shed over the loading track beside it, and another long clerestory roof shed that also spans the loading spur track.  My models are significantly shorter than the prototype and must fit within a curve formed by the turn-back loop at the end of the Springfield peninsula.  As such, considerable compromise was necessary in the design and construction of these pieces.


East end of Rosboro Lumber with large bow-roof shed and the narrow loading shed alongside it that spans the Rosboro spur.

I began with the bow-roof structure, shortening it considerably.  I used foam-core board for the primary structure to which I laminated aged wood siding from Clever Models Texture Collection Volume One (http://clevermodels.squarespace.com/catalog-pg-25x/).  To get close to twelve-inch wide planks, I used the S-scale eight-inch plank weathered wood siding texture.  This Clever Models texture collection repeats the textures in four scales (N, HO, S and O).  This was quite handy for this project.  I laminated this texture inside and out, with the inside going up around thirty scale feet and leaving the upper wall areas clear to mount wall bracing and roof formers.  

For the bow-roof forming, I needed a circle template of considerable size.  After experimenting with various shapes around the house, I settled on a pizza pan of roughly 18-inch diameter as a curve former.  I had tried a 24-inch diameter curve, but found it too flat, as seen in the photo below.


Forming the bow roof building end.  The upper curve matches the pizza pan underneath and is the curve selected.  The lower curve was a broader radius and was judged too flat.


Bow-roof building ready for the roof.  Multiple roof contour formers were cut from foam-core board using the same pizza pan as a template.

Staring at photos, I saw several openings in the side of the bow-roof building beginning with a long opening alongside the track.  I could see and roughly scale the door opening in the east end and could see openings through the structure on the far (north) wall.  I lined the foam-core for these openings with painted strips of .020 x 0.188-inch styrene.  

The side shed for the bow-roof building was built using styrene strip.  Roof trusses and posts were cut and formed from 0.125-inch square styrene strip.  I noted two different heights for the roof trusses along the length of this shed.  Closer photo examination revealed the east end of the shed had the trusses resting on top of side beams while the west end of the shed had those trusses built at the same level as their adjoining side beams.  Although I created a drawing for the end profile using photos, I found I needed to move the center post at the end portal to one side to make a wider portal which accounted for my curved spur.  I had to make a similar adjustment to the west end of the clerestory building.  I added vertical board sheeting in places indicated in my photos.  I glue-laminated back-to-back sheets of the same board photo texture used for the bow-roof building.  

The clerestory shed is at the west end of the loading shed complex.  Staring at the Google satellite view of the facility showed another structure connected to this building extending perpendicular to its main axis (away from the track).  I eventually realized this is much like the green chain seen at Western Lumber at Westfir and as modeled in the Walthers sawmill building kit I used there.  This was a late insight in the current building project, but I prepared well for it by creating an opening in the side wall for that added structure.  I will return to this part of the complex later. 


Clerestory building on the west end of the loading shed complex.  The shed over the tracks in the foreground appears to be a relatively recent addition, as photos from the 1970s do not show it.  Instead, a chip loading rack was located a bit further down the second Rosboro spur track spanned by this newer addition.

The clerestory building is very open, although the track side features more of the vertical plank side sheathing partially protecting that side.  An important element is "Rosboro Lumber Co." painted on these planks.  I was able to replicate this by first printing a photo texture sheet and then running this back through my printer to print a separate file that had the stencil-font Rosboro Lumber Co. lettering.


Rosboro Lumber Co. sign painted on the vertical plank partial sheathing alongside the tracks.

The clerestory roof building was built up similarly to the narrow side-shed--lots of roof trusses (twelve large trusses) and posts.  Once again, I sheathed this structure in appropriate spots using laminated photo-texture planking.  Although many of the Rosboro structures, including the clerestory roof loading shed, were painted tan, I chose to model this sheathing with the twelve-inch planking (this time in HO scale) from the Clever Models collection.


Clerestory roof structure assembly.  Angled truss sections were used to help the building fit around the loading spur curve.

Roofing for the sheds was painted white.  This shows both in current pictures and photos from the 1970s.  I cut the straight roof sections from 0.040-inch thick styrene sheet.  One two-feet long sheet was needed for one of the clerestory roof sections.  The bow roof received a mock-up roof from thick cardstock, pending availability of poster board of appropriate thickness.  This was one part of this complex I did not have the right material for and could not obtain in the Spring 2020 shut-down environment.

One other element needed to be addressed.  Although I carefully laid out the structure pieces to fit around my existing spur curve, actual construction showed I needed a bit more room.  After fussing with this for a day or two, I finally simply pulled up the track and re-laid it with more clearance to the adjacent wood chip loading spur.  Sometimes it simply is best to redo.


Curve fit check with the re-laid loading spur.  

Finally, it was time to complete the assembly of the separate pieces of the loading sheds and place them together on location!


East end of the Rosboro Lumber loading complex.


West end of the Rosboro Lumber loading complex.


Rosboro Lumber Co. sign.

It is great to have this major set of structures mostly complete and installed at the end of my Springfield peninsula!







Monday, April 20, 2020

INDUSTRIAL DEVELOPMENT - 4 - ROSBORO LUMBER-1

As I fill in the industrial base of Springfield, I have come at last to Rosboro Lumber.  Rosboro has been in business in Springfield since 1940 and is still going strong.  Rosboro occupies a large stretch of land on the north side of the tracks at Springfield and figures in many photos of the area.  

I took a number of photos seven years ago of Rosboro from the south side where a public road parallels the tracks.  This perspective matches operator and viewer perspectives of this area on my railroad.  Fortunately, I could augment these trackside views with an aerial view published in the Springfield Chamber of Commerce book I have used for other industries and a satellite view via Google Earth.  These will help as I develop some of the structures deeper into the facility, including the main saw mill and boiler house.


Main bow-roof loading shed at the east end of the Rosboro facility.


Rosboro loading sheds from the west.  The three stacks of the boiler house poke up from the middle of the facility.


Additional warehouse and loading sheds with another mill structure within its midst. The tall dust/chip blower is on the roof of this additional mill.

On my model railroad, Rosboro occupies a site within the turn-back loop at the end of the Springfield peninsula.  This is a very prominent location, immediately seen upon entry to my layout space.  Unfortunately, this means I must deal with curved tracks where the prototype features long straight tracks.  Fitting within the track curves and typically limited space on a model railroad results in an industry model that is more "inspired by" rather than a direct "model of."


Site for my Rosboro Lumber model.  This prominent location is at the end of the Springfield peninsula on my railroad.

I began my modeling effort with a representation of the long lumber loading sheds which parallel the mainline and span over one of the Rosboro spur tracks.  I was immediately faced with selectively compressing these sheds to something much shorter.  I chose to model three major components:  the large bow-roofed main shed at the geographic east end of the facility, the low covered loading shed over the rail spur alongside that larger building, and the clerestory roof structure at the other (geographic west) end.

I will be using more photo texture from Clever Models computer files.  I purchased their Texture Collection Vol. 1 for this project, using various wood siding textures.  http://clevermodels.squarespace.com/catalog-pg-25x/
I initially contemplated doing a simple foam core mock up, but quickly decided I could fairly easily face such mock-up walls with printed photo texture.  That led to my going directly to the "final" construction.  


Test fit of loading shed elements.  The bow-roof building is nearly complete.  The side loading shed roof trusses are laid out beside it and the larger roof trusses for the clerestory roof building have been assembled into a roof framework. This location test shows that chip gondolas can roll past the extended corner at the bend in the clerestory roof shed.

I will describe construction of the loading sheds further in a subsequent post.  Further posts will cover other elements of the Rosboro Lumber complex as I model them.  Although this post seems "incomplete" to me--I usually post on completed projects or structures--I recognized a need to show what I have been doing during the current challenging at-home time.  Roof trusses take a lot longer to build than I remember...

Saturday, April 4, 2020

URBAN RENEWAL - 4 - EUGENE PLANING

Continuing along the track and backdrop at Eugene, I turned to Eugene Planing.  This industry appears in several photos of Eugene near the depot.  It is distinctive with both a bow (curved) roof and shed roof.  One of the photos I used is on Joel Ashcroft's SP Cascades website:
http://spcascades.railfan.net/photos/DILL/264.jpg  The industry appears in a couple of other photos published in the Austin and Dill "SP in Oregon" books.  The side facing the tracks used clapboard siding, painted white.  

Given my model location alongside both the main post in my basement and against the backdrop, I chose to start with a good mock-up.  The mock-up may stay for a while, so I added details including marker pen outlines for the windows facing the tracks.  


Foam-core mock-up of the primary structure placed on paper for further planning of the bow roof for the left half of this structure and its walls.  The right portion of the structure uses a shed roof, as seen in the photo on Joel Ashcroft's site.  

As I built the main structure (the combined bow roof and shed roof), I felt I needed something more against the backdrop.  I consulted Google Earth and easily found today's version of the structure in a satellite view near the depot.  The buildings have been re-purposed, but the distinctive shape is very identifiable.  It appears Eugene Planing had buildings on both sides of Eugene's Third Street.  My space only represents the property on the track side of Third Street.  I employed "Modeler's License" to add more shed-roofed structure directly against the backdrop, conveying the feeling of a larger industry.


Eugene Planing building mock-ups.  The main loading sheds are near the tracks and have their roofs.  The add-on sheds against the backdrop are being tested for fit and artistic feel.

While the main structures were done in foam-core and other card stock for roofs, I chose to model the loading dock and timber gantry crane in styrene, nearly completing them.  The loading dock extends from the bow-roofed structure along the back-drop side of the rail spur and underneath the timber gantry.  I used my "conventional" freight dock construction with an Evergreen V-groove siding deck and styrene strip joists underneath.  There were something like 200 legs individually applied underneath.


Loading dock under construction.

I designed the timber gantry by roughly scaling from the photo.  I drew it up and then adjusted my dimensions.  My first cut was too large when I compared it to photos.  Careful photo study showed the purpose of wood piece that extended up from one corner post.  It was one half of the support for the three electric power wires for the gantry.  I easily modeled this with a bit of styrene strip, a few small holes and some phosphor-bronze wire.  The wire is even the right color!


Timber gantry.  This gantry likely was replaced by fork-lift vehicles sometime in the late 1950s or early 1960s.  Right now, I chose to let the era anachronism slide.  I like the gantry.


Eugene Planing looking RR-East, toward the depot on my railroad.


Eugene Planing, ready for service.

Although I have most of the materials to convert the foam-core mock-ups into completed models, I will leave this complex as is for a bit.  I am off to other industry adventures!